Brier · 98036 · about 8–12 minutes out
Repairs for long-kept kitchens and laundry rooms in Brier
Brier is a town of owner-occupied houses on large lots, most built between 1970 and 1999 and heated largely with gas. We reach it from central Lynnwood in about 8 to 12 minutes by way of Brier Road, and repair every major household appliance.
- $95 diagnosticcounted toward the repair you approve
- Up to $18 offfor seniors 65+, veterans and military
- $10 offthe second appliance checked on one visit
- Same-day visitsMonday through Saturday
Brier began as farm country, with mink farms through the first half of the 1900s and a 1924 subdivision called Shasta Park that was later cut into smaller parcels. Ranch houses followed in the 1950s and 60s, and in February 1965 the town incorporated rather than be absorbed by Mountlake Terrace. The real building boom came afterward: more than half of today’s houses date from 1980 to 1999. The town of about 6,630 people still allows nothing but single-family homes, on lots of 12,500 square feet or more.
That history shapes our work. Brier households tend to stay put, so we meet kitchens upgraded one machine at a time, laundry rooms on their third washer, and garages holding a spare refrigerator or a chest freezer. Same-day visits run Monday through Saturday, and a morning call gives us the surest chance of reaching you that day. Your technician diagnoses at the house, writes the price down before any repair and carries the parts that fail most often. Brier is billed exactly like Lynnwood, with no distance surcharge.
Roughly 8–12 minutes from central Lynnwood
Brier homes and what they mean for appliances
The 1980s building wave
Roughly 55 percent of homes went up between 1980 and 1999, over a third of them in the 1980s alone. The original appliances are mostly gone, yet the hookups stay: plastic ice-maker tubing, long dryer vent runs, dishwasher openings sized for that era. A newer machine on an aging hookup is a frequent story in our Brier diagnoses.
Gas in the kitchen and laundry
About 65 percent of Brier homes heat with gas, nearly double the Lynnwood share, and many have gas piped to the range or dryer as well. That puts oven igniters, dryer valve coils and burner spark modules near the top of our parts list here. If you smell gas at either appliance, leave the house before calling PSE or 911.
Mature trees and outages
Brier’s big lots carry plenty of tall trees, and windstorms bring them down on power lines. In November 2024, 70,000-plus PUD customers lost power in the bomb cyclone. Electronic controls do not always survive the return of power, and garage freezers take the hit when an outage drags on.
Alderwood Manor mail
Some unincorporated Alderwood Manor homes north of town use Brier as their postal city. Same water district, same short trip from Lynnwood, same rates. The area began in 1917 as a planned poultry-farm community laid out by the Puget Mill Co. Give us the street address when you book and we handle the rest.
Water, gas and power in Brier
Brier is served by the Alderwood district, which buys from Everett’s Spada Lake system, and its hardness runs about 12.5 ppm, under one grain per gallon. Water that soft leaves almost no scale in valves and heaters, but it turns ordinary detergent doses into foam and, over time, into etched glassware. Brier also sits near the King–Snohomish county line, where the convergence zone tends to be strongest, so laundry rooms stay damp for much of the year. PSE supplies the gas, and Snohomish County PUD serves electricity across the county. Gas heats about 65 percent of homes against 35 percent electric, nearly the reverse of Lynnwood and Mountlake Terrace next door. Brier’s oldest houses are 1950s and 60s ranches, with smaller kitchens and wiring of their decade, so we test the receptacle and breaker before condemning a range or dryer and say so when the fix belongs to an electrician. The 1980s houses are now about forty years old, and their original water lines, vent ducts and receptacles are aging along with them, so we look at the hookup as closely as the machine.
The calls we take most in Brier
Spare refrigerators and freezers in garages are near the top, especially after a cold snap or a long outage. Washers come next: families on large lots run big, frequent loads, and suspension parts, drain pumps and door locks wear accordingly. Gas dryer calls are more common here than in most towns we serve, usually for igniters and valve coils, and gas oven igniters follow the same pattern. Dishwasher calls tend to involve drains and the etching that very soft water causes, and ice makers fed by original plastic tubing round out the list, along with ranges whose controls quit after an outage. Dryer repair starts at $229 in Brier, as in every town we cover; that is the lowest price in the category and not a quote, and your own figure is the one on the written estimate after the diagnostic.
Common questions
How do I book, and what should I have ready?
Call (425) 287-5458 or use the three-step form on this page. Have the appliance brand and the model number from its tag ready, plus a short description of the symptom and any error code. If you are 65 or older, a veteran or in an active-duty military household, tick that box or say so on the phone for up to $18 off the repair. A morning request, Monday through Saturday, often means a same-day visit.
Do you repair furnaces or heat pumps in Brier?
No. We repair household appliances only: refrigerators and freezers, washers, dryers, ranges and ovens, dishwashers and ice makers. Furnaces, heat pumps and other heating and cooling equipment are outside our work, as are microwaves, countertop appliances and sealed-system refrigerator repair. When a diagnosis points to one of those, we tell you right away rather than charge you for work we do not do.
Our power came back after an outage and an appliance will not start. What should we check?
Start with the simple things: the breaker for that appliance, any GFCI receptacle in the kitchen or garage, and whether the plug is fully seated. Give a refrigerator half an hour after a reset before judging it, since many models delay the compressor on startup. If it still shows a blank display or will not run, book a visit; we test the supply before suspecting the control board.
Do you work on older appliances from the 1980s and 90s?
Yes, as long as the parts can still be found. Many older Whirlpool, GE and Kenmore machines share components that are still made, and simple ranges and dryers from that era are often easy to keep running. Control boards and some trim pieces for discontinued models are harder. Read us the model number and we will tell you before the visit how likely parts are.
Something not working?
Call (425) 287-5458 or book online for a Brier visit, usually the same day when you reach us in the morning. The $95 diagnostic is applied to any repair you go ahead with, and seniors 65+, veterans and active-duty military households get up to $18 off that repair as well.
Book a repair
Tell us what broke
Three quick steps. We call back to confirm a time; requests that come in during the morning can usually be seen the same day.
- $95 diagnostic counted toward the repair you approve
- Up to $18 off for seniors 65+, veterans and military
- $10 off the second appliance checked on one visit
- Same-day visits Monday through Saturday
Rather call? (425) 287-5458 · Mon–Sat 8–7